Best 4An 90 Degree Fitting in 2022 [*Top Picks*]
Looking for the best 4an 90 degree fitting on the market? We’ve got you covered. Check out our ratings of absolute bestsellers below and make a final decision.
1608 Reviews Scanned
SYKRSS 4AN Aluminum Anodize Finish Male/Female 90 Degree Flare Bulkhead Fitting Adapter AN-4 Black
The female to male swivel 90 degree fitting Size: female 4an to male -4an (7/16-20 UNF) thread pipe connectors
The 90 degree adapter fitting can allow for the connection of hose ends to other components like oil pumps, fuel pumps and fuel filters
The flare bulkhead fitting adapter are made of T6061 Aluminum, high strength and good durability; Polished and anodized for bright appearance and corrosion protection. Max Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃)
The female to male swivel fitting swivel 360° elbow design allows you to get things reasonable tight while still maintaining the swivel functionality so that you can ensure a proper connection and positioning before doing that final tightening down to lock everything into position. The swivel fitting has 37-degree "AN" sealing angle design assures leak free performance
SYKRSS value your shopping experience, If you encounter any problems in installing the Female/male swivel 90 degree fitting, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible
EVIL ENERGY 4AN 90 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black
The female AN4 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed.
4AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose .
These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place.
Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling.
EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.
AC PERFORMANCE Aluminum Swivel Coupling Fuel Fittings 90 Degree -4 AN Female to 4AN Female Flare Coupler Hose Union Adapter, 7/16 x 20 AN4 Thread Pipe Connector, Black
90 degree, Female -4 AN to -4AN coupling hose union equal fitting connector
Made of high quality lightweight 6061-T6 aluminum material
Black anodized finish for durability and strength
Universal fit such as: oil/ fuel/ gas/ water/ fluid hose ends
Designed to match with common performance hose and hose ends
EVIL ENERGY 4AN to 1/8 NPT Male 90 Degree Fitting Adapter Aluminum
Size: 4AN flare to 1/8 NPT,the thread size of 4AN is 7/16-20UNF.
Material: Made of aluminum alloy 6061-T6, anodized black surface.
Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.)
1/8 NPT to 4an 90 degree elbow fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc.
EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message.
Female 4AN to Male 4 AN Flare 90 Degree Hose Union Bulkhead Fuel Fitting Adapter Forged Elbow Swivel Hose Connector Black Alumiunm Anodized
Size: female AN4 to male -4an (JIC 4, 9/16-18) thread pipe connectors, 90 Deg elbow flare bulkhead
Material: High Performance Lightweight 6061-T6 CNC Machined Billet Aluminum
Finish: Black Aluminum Anodized for Durability and Strength
Application: Fuel/Oil/Gas/Fluid/ Water/Air Line
Male an4 flare to female an4 equal union tube hose adaptors Specialty AN
4AN 90 Degree Female to Male Flare Swivel Hose Union Bulkhead Adapter Fittings Aluminum Black
Size: AN4 male flare an to 4 AN female equal pipe union connector, 90 deg swivel elbow
Material: High grade aircraft Lightweight 6061-T6 billet Aluminum
Black anodized, Precision machined to ensure precise thread engagement
Allow for the connection of hose ends to other components like oil pumps, fuel pumps and fuel filter
All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics
4AN Swivel Hose End Fitting 90 Degree AN4 for Braided CPE Fuel Hose Blue&Red(2PCS)
【Tips】4AN 90 degree fitting only be worked with Braided CPE fuel line. It can not be installed on PTFE Hose.
【Size】Thread Size of 4AN hose fitting is 7/16-20UNF and the braided CPE fuel line which works with should be 1/4".
【Install】Swivel design for easy assembly, the adjustable AN wrench is recommended.
【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems.
EVIL ENERGY 4AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only 2Pcs
Please Attention that the 4AN PTFE hose end can be work with PTFE fuel line ONLY.
Thread Size of 4AN PTFE Fitting is 7/16-20UNF and work with PTFE fuel line(Hose ID: 0.20 inch OD: 0.32-0.35 inch).
The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting.
EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters.
Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service.
KRD PERFORMANCE Aluminum 4AN Male Flare Bulkhead 90 Degree Fuel Fitting Union Adapter with AN4 Bulkhead Nut, Black
4AN to 4AN male thread flare bulkhead pipe adapter with an4 bulkhead nut, 90 Degree
Manufactured from high performance lightweight 6061-T6 cnc machined billet aluminum
Surface treatment: black anodized finish for long last, durability and strength
Designed to ensure the reliability required in a high pressure steering system
Each component is precision-machined to exact tolerances for trouble-free performance
AC PERFORMANCE 90 Degree Aluminum -4 AN Male to AN4 Female Swivel Union Full Flow Elbow Fitting Adapter, Black
4AN Male to Female Swivel Union Full Flow Elbow, 90 Degree, black
Universal application for Oil/ Fuel/ Water/ Fluid/ Air Line
Designed to match with common performance hose and hose ends
Completely reusable, just disassemble and put onto another hose.
Made of high quality lightweight 6061-T6 cnc machined billet aluminum material